Why it is so difficult to remove PFAS from drinking water

tap water healthy question mark

Water companies are investing in new treatment processes to remove PFAS. Researchers from KWR and Vewin explain why this is no simple task: “So far, we have not managed to achieve 100 per cent removal.”

What techniques are there?

  • Activated carbon: is already standard practice at many water companies.
  • Ion exchange: removes a lot of PFAS, but the resins cannot usually be reused.
  • Reverse osmosis: At present, a few per cent of drinking water is treated in this way; this figure is rising.
  • Nanofiltration: removes about half of the small TFA.

Where’s the problem?

  • Small PFAS such as TFA pass through carbon filters unhindered.
  • Larger PFAS pass through the filters four to ten times faster than other micro-contaminants. The carbon therefore needs to be replaced more often, which incurs higher costs.
  • In reverse osmosis, a residual flow containing concentrated PFAS remains, which is then discharged back into surface water.
  • According to Arcadis, drinking water companies need at least ten years to set up a membrane treatment plant.

The researchers describe complete removal as “a pipe dream” and call for a total ban on PFAS: tackling the problem at source.

Construction is certainly taking place

PWN is building an additional treatment plant at the Heemskerk water treatment works. “We are building an additional treatment plant here to filter PFAS out of the water even more effectively,” says the company. The existing treatment plants do not yet meet the RIVM’s recommended limit of 4.4 nanograms per litre in all cases.

What can you do yourself?

The RIVM advises people to continue drinking tap water as normal: exceeding the guideline value does not mean that the water is unsafe. The RIVM also points out that bottled water is not always better and may itself contain PFAS.

If you’d still like an extra filtration stage at home, that’s possible. The filter in the Alpha water ioniser has ten layers, including activated carbon and an ultrafiltration membrane down to 0.01 microns. According to the manufacturer, it removes, amongst other things, chlorine, rust, heavy metals and bacteria. The membrane does not block PFAS; the activated carbon can reduce PFAS, and those most concerned about PFAS can opt for the activated carbon filter. We haven’t carried out any measurements on our own filters, so we cannot promise a specific percentage. Compare the filters. Read the Water Guide for the full story in eight steps, or Use the decision aid to see which model suits your household.

Sources

In this article

Are you concerned about PFAS in your tap water?

The Water Guide explains in eight steps what’s going on and what you can do about it at home.

Launch the Water Guide

Calculate your payback periodCalculate your costs →Which model is right for me?Take the decision-making guide →

Would you prefer some personalised advice? +31 85 401 0083

Wondering how much it costs: at home, at work or on the move?

Take the two-minute kitchen scan and receive a personalised quote for your home or business, including installation. If you’re out and about, you can order the portable H2CapPlus directly in-store.